The main criteria for the selection of tires

FineAuto
The main criteria for the selection of tires

Automotive rubber is one of the wear parts of the machine. After all, it is influenced by many external factors. Therefore, the choice of tyres must be approached with the utmost seriousness, as for purchasing you need to consider many important moments. With price help to make comparison prices on the website Hotline.

For each driver the choice of tyres for your car – it’s not the most simple. Before buying tires you need to analyze a number of factors: the category and the desired marking rubber, car and the conditions of its operation, the driving style and the condition of the roadway, weather conditions.

Decoding tyre labelling

First of all, you need to know the size of tires. In every manual car designated marking, recommended by the manufacturer of the car. The size indicated on its side. For example, the size as follows: 200/60 R16 94 H.

200 – the first number in the marking denoting the width of the rubber in mm. wider tire, for example, provide better acceleration and braking, but, respectively, they are more expensive and require greater fuel consumption than narrow tires.

60 is a so – called profile of the tire or the percentage of the profile height to width. Thus, with the same width will be above the rubber, whose profile more. Low-profile tires designed for travel over roads of good quality, while high rubber more suitable for riding on dirt, not paved roads. There are full-profile tires on which the figure is not specified in the marking, this means that it is equal to 80-82%.

R – marking tires radial-ply. There is also the designation D – diagonal construction tires, but the release of them at the present time practically not possible.

16 is the outer diameter of the wheel or the inner wheel diameter in inches.

94 – the index of the maximum load on the wheel. The index value in this case means 670 kg maximum load on 1 wheel.

N – the index of speed. In this example, it means 210 km/h – the speed limit for preservation of quality characteristics of the tire.

The tread pattern of the rubber

When buying rubber also should pay attention to the tread. The most commonly used currently are the tyres with asymmetrical pattern and directional. Directional tires are marked with marking and Rotation are to be establish in the direction of rotation according to the arrow in the marking wheel. Directional tyres are great to use, but cannot be changed by the parties without pereborchivy. The outer and inner side of an asymmetrical tire tagged with Outside and Inside, in strict accordance with which the wheel needs to be installed.

The designations Right and Left are the right and left, respectively, indicate the need for the installation of the tire on either side of the car. For lovers of a leisurely drive who want to buy high quality but cheap tyres, fit tyres with a symmetrical pattern on the tread. Directional and asymmetric tires are the most durable in contrast to a symmetric tire. Many tyres have in their marking marking the TWI wear indicator tire tread in the form of evenly spaced around the circumference of the wheel protrusions in the drainage grooves. Abrasion of the tread to such projections indicates the need for replacement tires.

Tread for summer tires

One of the factors determining the choice of those or other tires, is the forthcoming weather conditions. Summer tires have a great grip and performance during the warmer time of the year when heating of the road surface sometimes to high temperatures. The tread of summer tires includes drain grooves that ensure safety when driving in rainy time. For a more comfortable feeling from traveling in rainy weather have been developed and applied the so-called rain tires that reduce the effect of planning on a wet road due to additional grooves in the tread. These tires are marked with the notation Aqua, Aquacontact, Rain or Water or a badge in the form of an umbrella.

Features of winter tyres

In the manufacture of winter tires, unlike the summer, use a softer material adapted to harsh weather conditions. Winter tyres have more tread depth and the presence of thorns. Studded tires are especially applicable when traveling in the ice and rolled snow. And on dry pavement behaves better in the winter non-studded tires. Winter tires marked with the symbol M&S – mud and snow. All-season tires marked marked All Season or Aw (Any weather). In many regions of Ukraine with the characteristic times of the year such tires it is recommended to use in the offseason or in temperate climates in winter. Quality all-season tires are quite expensive in price, so it may be more expedient and cheaper to buy separately kits and winter tires, and summer.

Opting Shin Ukrainian or foreign production depends on own preferences and availability of quality certificates, which must be provided upon request.

News tags